top of page

Medical PMMA

Strong, Biocompabile, Chemical Resistant

#material_info

Medical PMMA Filament represents a biocompatible and non-toxic 3D printing material renowned for its chemical resistance. Particularly well-suited for the production of permanent implants, medical devices, and medical equipment, it serves as a viable substitute for polycarbonate (PC), offering an enhanced level of transparency and a sleek, high-gloss finish.

#the_sciences

• Made from medical grade PMMA resin with engineered process
• Biocompatible formulation
• Tough and strong 3D printed objects comparable to moulding

#material_highlights

• Highly transparent & outstanding impact resistance
• Resistant to most chemicals especially acids
• USP Class VI and ISO 10993 certified
• Gamma or EtO sterilizable

#ideal_for

Surgical instrument and training models (such as body fluid container, microfluidic device, pump impeller, stirrer, etc.)

#Cranioplasty_
Implant_
Printed_
by_
NOVUS_
Medical_
PMMA

#Cranioplasty_
Implant_
Printed_
by_
NOVUS_
Medical_
PMMA

#material_properties

Flexural strength (ASTM D790)

62 MPa

Flexural modulus (ASTM D790)

1.68 GPa

✔ Industry standard facilities

✔ Produced in ISO 7 cleanroom facilities
✔ ISO 9001, ISO 13485 quality management system 

✔ In-house ethylene oxide (EtO) sterilization 

Cleanroom - Air shower

#medical_quality

OPMAC - 1.75mm Filament diament tolerence
1.75mm Filament diament tolerence
Keyence - 1.75mm Filament diament tolerence
1.75mm Filament diament tolerence

#extreme_diameter_tolerence

✔ 1.75mm diameter with far less than ±0.05mm tolerance

✔ ±0.01mm tolerance at best
✔ Real-time feedback in diameter control in production  

✔ Powered by Keyence and EECTRL Opmac laser technologies
✔ Stringent quality control with no compromise

bottom of page